Brand Brand name of the company that manufactures the device. | Huawei |
Model Model name of the device. | Pura 70 Pro |
Model alias Аlternative names, under which the model is known. | HBN-AL00 HBN-LX9 |
Width Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. | 75.1 mm (millimeters) 7.51 cm (centimeters) 0.246 ft (feet) 2.957 in (inches) |
Height Information about the height, i.e. the vertical side of the device when it is used in its standard orientation. | 162.6 mm (millimeters) 16.26 cm (centimeters) 0.533 ft (feet) 6.402 in (inches) |
Thickness Information about the thickness/depth of the device in different measurement units. | 8.4 mm (millimeters) 0.84 cm (centimeters) 0.028 ft (feet) 0.331 in (inches) |
Weight Information about the weight of the device in different measurement units. | 220 g (grams) 0.49 lbs (pounds) 7.76 oz (ounces) |
Volume Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped. | 102.57 cm³ (cubic centimeters) 6.23 in³ (cubic inches) |
Colors Information about the colors, in which the device is available in the market. | Roland Purple Snow White Feather Black |
Body materials Materials used in the fabrication of the device's body. | Plastic Glass |
Certification Information about the standards, in which the device is certified. | IP68 |
SIM card type Information about the type and size (form factor) of the SIM card used in the device. | Nano-SIM (4FF - fourth form factor, since 2012, 12.30 x 8.80 x 0.67 mm) |
Number of SIM cards Information about the number of SIM cards, supported by the device. | 2 |
Features Information about some specific features related to the SIM card(s) of the device. | Dual SIM stand-by (Both cards are active. When one is busy, the other is not active) |
GSM GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology. | GSM 850 MHz (B5) GSM 900 MHz (B8) GSM 1800 MHz (B3) GSM 1900 MHz (B2) |
CDMA CDMA (Code-Division Multiple Access) is a channel access method for communications within mobile networks. Compared to other 2G and 2.5G standards like GSM and TDMA, it provides increased data transfer speeds and allows more subscribers to connect simultaneously to the network. | CDMA 800 MHz (BC0) |
W-CDMA W-CDMA (Wideband Code Division Multiple Access) is an air interface used by 3G mobile networks. It is one of the three different UMTS interfaces together with the TD-SCDMA and the TD-CDMA. The standard provides faster data transfer speeds and allows more users to connect to the network simultaneously. | W-CDMA 850 MHz (B5) W-CDMA 850 MHz (B6) W-CDMA 900 MHz (B8) W-CDMA 900 MHz (B19) W-CDMA 1700 MHz (B4) W-CDMA 1900 MHz (B2) W-CDMA 2100 MHz (B1) |
LTE LTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced. | LTE-FDD 700 MHz (B12) LTE-FDD 700 MHz (B13) LTE-FDD 700 MHz (B28) LTE-FDD 800 MHz (B20) LTE-FDD 850 MHz (B5) LTE-FDD 900 MHz (B8) LTE-FDD 1700 MHz (B4) LTE-FDD 1700 MHz (B66) LTE-FDD 1800 MHz (B3) LTE-FDD 1900 MHz (B2) LTE-FDD 2100 MHz (B1) LTE-FDD 2600 MHz (B7) LTE-TDD 1900 MHz (B39) LTE-TDD 2000 MHz (B34) LTE-TDD 2300 MHz (B40) LTE-TDD 2500 MHz (B41) LTE-TDD 2600 MHz (B38) |
5G NR The 5G (fifth generation) mobile networks use the new radio access technology (RAT) developed by 3GPP, dubbed 5G NR and deemed as the global standard for the air interface of 5G networks. 5G NR operates in two frequency ranges - FR1 (sub-6 GHz) and FR2 (above 24 GHz). In the FR1 frequency range, the 5G mobile networks use a number of bands, some of which are traditionally used by previous standards. The FR2 provides shorter range but higher available bandwidth than bands in the FR1. | 5G-FDD 700 MHz (n28) 5G-FDD 800 MHz (n20) 5G-FDD 850 MHz (n5) 5G-FDD 900 MHz (n8) 5G-FDD 1800 MHz (n3) 5G-FDD 2100 MHz (n1) 5G-TDD 2100 MHz (n34) 5G-TDD 2300 MHz (n40) 5G-TDD 2500 MHz (n41) 5G-TDD 3500 MHz (n78) 5G-TDD 3700 MHz (n77) |
HBN-LX9 (global model) - no 5G |
Mobile network technologies There are several network technologies that enhance the performance of mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device and their respective uplink and downlink bandwidth. | UMTS (384 kbit/s ) EDGE GPRS HSPA+ LTE 5G SA 5G NSA |
HBN-LX9 (global model) - no 5G |
Operating system (OS) Information about the operating system used by the device as well as its version. | HarmonyOS 4.2 |
CPU bits The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors. | 64 bit |
CPU cores A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. | 8 |
RAM capacity RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted. | 12 GB (gigabytes) |
Storage Information about the capacity of the built-in storage of the device. Sometimes one and the same model may is offered in variants with different internal storage capacity. | 256 GB (gigabytes) 512 GB (gigabytes) 1024 GB (gigabytes) |
Type/technology One of the main characteristics of the display is its type/technology, on which depends its performance. | OLED |
Diagonal size In mobile devices display size is represented by the length of its diagonal measured in inches. | 6.8 in (inches) 172.72 mm (millimeters) 17.27 cm (centimeters) |
Width Approximate width of the display | 2.75 in (inches) 69.96 mm (millimeters) 7 cm (centimeters) |
Height Approximate height of the display | 6.22 in (inches) 157.92 mm (millimeters) 15.79 cm (centimeters) |
Aspect ratio The ratio between the long and the short side of the display | 2.257:1 |
Resolution The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content. | 1260 x 2844 pixels |
Pixel density Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen. | 457 ppi (pixels per inch) 179 ppcm (pixels per centimeter) |
Color depth The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display. | 30 bit 1073741824 colors |
Display area The estimated percentage of the screen area from the device's front area. | 90.77 % (percent) |
Other features Information about other functions and features of the display. | Capacitive Multi-touch Scratch resistant |
2.5D curved glass screen 2nd Gen Kunlun Glass LTPO backplane 1 Hz - 120 Hz dynamic refresh rate 300 Hz touch sampling rate 1440 Hz PWM dimming 100% DCI-P3 10-bit color bit depth 2500 cd/m² peak brightness HDR Vivid ZReal Engine |
Sensors Sensors vary in type and purpose. They increase the overall functionality of the device, in which they are integrated. | Proximity Light Accelerometer Compass Gyroscope Fingerprint Hall Gravity |
In-display fingerprint sensor |
Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on mobile devices are CMOS, BSI, ISOCELL, etc. | CMOS BSI 2 (backside illumination 2) |
Sensor format The optical format of an image sensor is an indication of its shape and size. It is usually expressed in inches. | 1/1.3" |
Aperture The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening. | f/1.4 - 4 |
Flash type The rear cameras of mobile devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements. | Dual LED |
Image resolution One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal and vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions. | 8192 x 6144 pixels 50.33 MP (megapixels) |
Video resolution Information about the maximum resolution at which the rear camera can shoot videos. | 3840 x 2160 pixels 8.29 MP (megapixels) |
Video FPS Information about the maximum number of frames per second (fps) supported by the rear camera while recording video at the maximum resolution. Some of the main standard frame rates for recording and playing video are 24 fps, 25 fps, 30 fps, 60 fps. | 30 fps (frames per second) |
Features Information about additional software and hardware features of the rear camera which improve its overall performance. | Autofocus Continuous shooting Digital zoom Optical zoom Digital image stabilization Optical image stabilization Geotagging Panorama HDR Touch focus Face detection White balance settings ISO settings Exposure compensation Self-timer Scene mode Macro mode Phase detection autofocus (PDAF) Laser autofocus (LAF) |
XD Fusion Pro Image Engine Secondary rear camera - 12.5 MP (ultra-wide) Aperture size - f/2.2 (#2) Third rear camera - 48 MP (macro telephoto) Aperture size - f/2.1 (#3) OIS (#3) Autofocus (#3) 3.5x optical zoom (#3) |
Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on mobile devices are CMOS, BSI, ISOCELL, etc. | CMOS (complementary metal-oxide semiconductor) |
Aperture The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening. | f/2.4 |
Image resolution Information about the number of pixels on the horizontal and vertical dimensions of the photos taken by the front camera, indicated in megapixels as well. | 4120 x 3120 pixels 12.85 MP (megapixels) |
Video resolution Information about the maximum resolution of the videos shot by the front camera. | 3840 x 2160 pixels 8.29 MP (megapixels) |
Video FPS Digital cameras are able to shoot videos at different frames per second (fps). Some of the main standard frame rates for recording and playing video are 24 fps, 25 fps, 30 fps, 60 fps. Information about the maximum possible fps for shooting videos at the maximum possible resolution. | 30 fps (frames per second) |
Features Information about additional software and hardware features of the front camera which improve its overall performance. | Face detection Face unlock Video HDR Vivid Autofocus |
Speaker The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses. | Loudspeaker Earpiece |
Radio Information whether the device has an FM radio receiver or not. | No |
Tracking/Positioning The tracking/positioning service is provided by various satellite navigation systems, which track the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS and the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID. | GPS A-GPS GLONASS BeiDou Galileo NavIC QZSS |
Wi-Fi Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices to communicate with each other without the need for wireless access point (WAP). | 802.11a (IEEE 802.11a-1999) 802.11b (IEEE 802.11b-1999) 802.11g (IEEE 802.11g-2003) 802.11n (IEEE 802.11n-2009) 802.11n 5GHz 802.11ac (IEEE 802.11ac) Wi-Fi 6 (IEEE 802.11ax) Wi-Fi Hotspot Wi-Fi Direct Wi-Fi Display |
2x2 MIMO HE160 1024 QAM 8 Spatial-stream Sounding MU-MIMO |
Version The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the Bluetooth version of the device. | 5.2 |
Features Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here. | A2DP (Advanced Audio Distribution Profile) LE (Low Energy) |
Connector type There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device. | USB Type-C |
Version There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased. | 3.1 |
Features Тhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc. | Charging Mass storage On-The-Go |
Gen 1 - 5 Gbps DisplayPort Alt Mode |
Headphone jack Information whether the device is equipped with a 3.5 mm audio jack. | No |
Connectivity Information about some of the most widely used connectivity technologies supported by the device. | Computer sync OTA sync Infrared NFC VoIP VoLTE |
Browser Information about some of the features and standards supported by the browser of the device. | HTML HTML5 CSS 3 |
Audio file formats/codecs List of some of the most common audio file formats and codecs supported standardly by the device. | 3GPP (3rd Generation Partnership Project, .3gp) AAC (Advanced Audio Coding) AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga) aptX / apt-X aptX HD / apt-X HD / aptX Lossless FLAC (Free Lossless Audio Codec, .flac) M4A (MPEG-4 Audio, .m4a) MIDI MP3 (MPEG-2 Audio Layer II, .mp3) OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus) WAV (Waveform Audio File Format, .wav, .wave) LDAC L2HC |
Video file formats/codecs List of some of the most common video file formats and codecs supported standardly by the device. | 3GPP (3rd Generation Partnership Project, .3gp) MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v) WebM |
Capacity The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours. | 5050 mAh (milliampere-hours) |
Type The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer). | Li-Polymer |
Charger output power Information about the electric current (amperes) and voltage (volts) the charger outputs. The higher power output allows faster charging. | 20 V (volts) / 5 A (amps) |
Features Information about some additional features of the device's battery. | Wireless charging Fast charging Non-removable |
80 W wireless charging 20 W reverse wireless charging |
Additional features Information about other features of the device. | BeiDou Satellite Image News - China only |