Brand Brand name of the company that manufactures the device. | Maze |
Model Model name of the device. | Blade |
Width Information about the width, i.e. the horizontal side of the device when it is used in its standard orientation. | 69.6 mm (millimeters) 6.96 cm (centimeters) 0.228 ft (feet) 2.74 in (inches) |
Height Information about the height, i.e. the vertical side of the device when it is used in its standard orientation. | 158.5 mm (millimeters) 15.85 cm (centimeters) 0.52 ft (feet) 6.24 in (inches) |
Thickness Information about the thickness/depth of the device in different measurement units. | 7.9 mm (millimeters) 0.79 cm (centimeters) 0.026 ft (feet) 0.311 in (inches) |
Weight Information about the weight of the device in different measurement units. | 152 g (grams) 0.34 lbs (pounds) 5.36 oz (ounces) |
Volume Estimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped. | 87.15 cm³ (cubic centimeters) 5.29 in³ (cubic inches) |
Colors Information about the colors, in which the device is available in the market. | Black Gold |
Body materials Materials used in the fabrication of the device's body. | Aluminium alloy |
Certification Information about the standards, in which the device is certified. | IP68 |
SIM card type Information about the type and size (form factor) of the SIM card used in the device. | Micro-SIM (3FF - third form factor, since 2003, 15.00 x 12.00 x 0.76 mm) Micro-SIM / microSD |
Number of SIM cards Information about the number of SIM cards, supported by the device. | 2 |
Features Information about some specific features related to the SIM card(s) of the device. | Dual SIM optional (A variant of the model with two SIM card slots is available) |
GSM GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology. | GSМ 850 МНz GSМ 900 МНz GSМ 1900 МНz |
UMTS UMTS stands for Universal Mobile Telecommunications System. Based on the GSM standard, it is deemed as a 3G mobile network standard. It has been developed by the 3GPP and its major advantage is the provision of greater bandwidth and spectral efficiency, due to the W-CDMA technology. | UМТS 900 МНz UМТS 1700/2100 МНz UМТS 1900 МНz UМТS 2100 МНz |
LTE LTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced. | LТЕ 700 МНz Сlаss 13 LТЕ 700 МНz Сlаss 17 LТЕ 800 МНz LТЕ 850 МНz LТЕ 900 МНz LТЕ 1700/2100 МНz LТЕ 1800 МНz LТЕ 2100 МНz LТЕ 2600 МНz LТЕ-ТDD 1900 МНz (В39) LТЕ-ТDD 2300 МНz (В40) LТЕ-ТDD 2500 МНz (В41) LТЕ 700 МНz (В12) |
Mobile network technologies There are several network technologies that enhance the performance of mobile networks mainly by increased data bandwidth. Information about the communication technologies supported by the device and their respective uplink and downlink bandwidth. | UМТS GРRS LТЕ Саt 9 |
Operating system (OS) Information about the operating system used by the device as well as its version. | Аndrоid 6.0.1 Маrshmаllоw Аndrоid 7.0 Νоugаt Аndrоid 8.0 Оrео |
User interface (UI) Name and version of the user interface (UI) used by the operating system (OS). | TouchWiz |
SoC The SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning. | Sаmsung Ехynоs 8890 |
Process technology Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU. | 14 nm (nanometers) |
CPU CPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications. | 4х 2.3 GНz Ехynоs М1 Моngооsе, 4х 1.6 GНz АRМ Соrtех-А53 |
CPU bits The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors. | 64 bit |
Instruction set The instruction set architecture (ISA) is a set of commands used by the software to manage the CPU's work. Information about the set of instructions the processor can execute. | ARMv8-A |
Level 1 cache memory (L1) The cache memory is used by the processor in order to shorten the time needed to access data and instructions that a frequently used. The L1 (level 1) cache memory has a small volume, but operates faster than the RAM and the rest cache memory levels. If the processor does not find the data needed in L1, it continues to look for it in the L2 cache memory. In some processors the search in L1 and L2 is simultaneous. | 16 KB + 16 KB (kilobytes) |
CPU cores A CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel. | 8 |
CPU frequency The frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz). | 2300 MHz (megahertz) |
GPU GPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In mobile devices GPU is usually utilized by games, UI, video playback, etc. GPU can also perform computation in applications traditionally handled by the CPU. | ARM Mali-T880 MP12 |
GPU cores Similar to the CPU, the GPU consists of processing units called cores. They handle the computation of graphics in various applications. | 12 |
GPU frequency The frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz). | 450 MHz (megahertz) |
RAM capacity RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted. | 3 GB (gigabytes) |
RAM type Information about the type of RAM used by the device. | LPDDR3 |
RAM channels Information about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates. | Single channel |
RAM frequency RAM frequency relates directly to the rate of reading/writing from/in the RAM memory. | 1694 MHz (megahertz) |
Storage Information about the capacity of the built-in storage of the device. Sometimes one and the same model may is offered in variants with different internal storage capacity. | 32 GB (gigabytes) 64 GB (gigabytes) |
UFS 2.0 |
Types The various types of memory cards are characterized by different sizes and capacity. Information about the supported types of memory cards. | microSD microSDHC microSDXC |
Type/technology One of the main characteristics of the display is its type/technology, on which depends its performance. | Super AMOLED |
Diagonal size In mobile devices display size is represented by the length of its diagonal measured in inches. | 5.1 in (inches) 129.54 mm (millimeters) 12.95 cm (centimeters) |
Width Approximate width of the display | 2.09 in (inches) 53.16 mm (millimeters) 5.32 cm (centimeters) |
Height Approximate height of the display | 4.65 in (inches) 118.13 mm (millimeters) 11.81 cm (centimeters) |
Aspect ratio The ratio between the long and the short side of the display | 2.222:1 |
Resolution The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content. | 1080 x 2400 pixels |
Pixel density Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen. | 516 ppi (pixels per inch) 202 ppcm (pixels per centimeter) |
Color depth The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display. | 24 bit 16777216 colors |
Display area The estimated percentage of the screen area from the device's front area. | 57.11 % (percent) |
Other features Information about other functions and features of the display. | Capacitive Multi-touch Scratch resistant |
Corning Gorilla Glass 4 2.5D curved glass screen |
Sensors Sensors vary in type and purpose. They increase the overall functionality of the device, in which they are integrated. | Proximity Light Accelerometer Fingerprint |
Sensor model Information about the manufacturer and model of the image sensor used by this camera of the device. | Sony IMX260 Exmor RS |
Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on mobile devices are CMOS, BSI, ISOCELL, etc. | CMOS (complementary metal-oxide semiconductor) |
Pixel size Pixels are usually measured in microns (μm). Larger ones are capable of recording more light, hence, will offer better low light shooting and wider dynamic range compared to the smaller pixels. On the other hand, smaller pixels allow for increasing the resolution while preserving the same sensor size. | 1.127 µm (micrometers) 0.001127 mm (millimeters) |
Aperture The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening. | f/1.7 |
Focal length and 35 mm equivalent Focal length is the distance in millimeters from the focal point of the image sensor to the optical center of the lens. The 35 mm equivalent indicates the focal length at which a full-frame camera will achieve an angle of view that's the same as the one of the camera of the mobile device. It is measured by multiplying the native focal length of the camera by the crop factor of the sensor. The crop factor itself can be determined as the ratio between the diagonal distances of the image sensor in the 35 mm camera and a given sensor. | 3.5 mm (millimeters) |
Flash type The rear cameras of mobile devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements. | LED |
Image resolution One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal and vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions. | 4160 x 3024 pixels 12.58 MP (megapixels) |
Video resolution Information about the maximum resolution at which the rear camera can shoot videos. | 3840 x 2160 pixels 8.29 MP (megapixels) |
Video FPS Information about the maximum number of frames per second (fps) supported by the rear camera while recording video at the maximum resolution. Some of the main standard frame rates for recording and playing video are 24 fps, 25 fps, 30 fps, 60 fps. | 30 fps (frames per second) |
Features Information about additional software and hardware features of the rear camera which improve its overall performance. | Autofocus Continuous shooting Digital zoom Digital image stabilization Optical image stabilization Geotagging Panorama HDR Touch focus Face detection White balance settings ISO settings Exposure compensation Self-timer Scene mode Macro mode RAW Phase detection autofocus (PDAF) |
Available also with Samsung S5K2L1 (ISOCELL) Phase detection with Dual Pixel Object tracking AF Smart OIS 1080p @ 60 fps 720p @ 120 fps |
Sensor model Information about the manufacturer and model of the image sensor used by this camera of the device. | Samsung S5K4E6 |
Sensor type Information about the sensor type of the camera. Some of the most widely used types of image sensors on mobile devices are CMOS, BSI, ISOCELL, etc. | ISOCELL |
Sensor size Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution. | 4.54 x 2.4 mm (millimeters) 0.2 in (inches) |
Pixel size Pixels are usually measured in microns (μm). Larger ones are capable of recording more light, hence, will offer better low light shooting and wider dynamic range compared to the smaller pixels. On the other hand, smaller pixels allow for increasing the resolution while preserving the same sensor size. | 1.29 µm (micrometers) 0.001290 mm (millimeters) |
Crop factor Crop factor is the ratio of the dimensions of a full frame camera's sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the sensor in question. | 8.43 |
Aperture The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening. | f/2 |
Focal length and 35 mm equivalent Focal length is the distance in millimeters from the focal point of the image sensor to the optical center of the lens. The 35 mm equivalent indicates the focal length at which a full-frame camera will achieve an angle of view that's the same as the one of the camera of the mobile device. It is measured by multiplying the native focal length of the camera by the crop factor of the sensor. The crop factor itself can be determined as the ratio between the diagonal distances of the image sensor in the 35 mm camera and a given sensor. | 3.5 mm (millimeters) 29.49 mm (millimeters) *(35 mm / full frame) |
Field of view In photography, the Field of view (FoV) depends not only on the focal length of the lens but also on the sensor size. It is derived from the lens's angle of view and the sensor's crop factor. The lens's angle of view is a measure of the angle between the two farthest separated points within the frame measured diagonally. Simply put, this is how much of a scene in front of the camera will be captured by the camera's sensor. | 84 ° (degrees) |
Image resolution Information about the number of pixels on the horizontal and vertical dimensions of the photos taken by the front camera, indicated in megapixels as well. | 3520 x 1335 pixels 4.7 MP (megapixels) |
Video resolution Information about the maximum resolution of the videos shot by the front camera. | 1920 x 1080 pixels 2.07 MP (megapixels) |
Video FPS Digital cameras are able to shoot videos at different frames per second (fps). Some of the main standard frame rates for recording and playing video are 24 fps, 25 fps, 30 fps, 60 fps. Information about the maximum possible fps for shooting videos at the maximum possible resolution. | 30 fps (frames per second) |
Speaker The loudspeaker is a device, which reproduces various sounds such as ring tones, alarms, music, voice calls, etc. Information about the type of speakers the device uses. | Loudspeaker |
Cirrus Logic CS47L91 |
Radio Information whether the device has an FM radio receiver or not. | Yes |
Tracking/Positioning The tracking/positioning service is provided by various satellite navigation systems, which track the autonomous geo-spatial positioning of the device that supports them. The most common satellite navigation systems are the GPS and the GLONASS. There are also non-satellite technologies for locating mobile devices such as the Enhanced Observed Time Difference, Enhanced 911, GSM Cell ID. | GРS А-GРS |
Wi-Fi Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices to communicate with each other without the need for wireless access point (WAP). | 802.11а 802.11b (IEEE 802.11b-1999) 802.11g (IEEE 802.11g-2003) 802.11а 802.11аd |
Version The technology has several versions, which improve the connection speed, range, connectivity and discoverability of the devices. Information about the Bluetooth version of the device. | 4.2 |
Features Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here. | A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Visual Remote Control Profile) DIP (Device ID Profile) HFP (Hands-Free Profile) HID (Human Interface Profile) HSP (Headset Profile) LE (Low Energy) MAP (Message Access Profile) OPP (Object Push Profile) PAN (Personal Area Networking Profile) PBAP/PAB (Phone Book Access Profile) |
Connector type There are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device. | Micro USB |
Version There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased. | 2.0 |
Features Тhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc. | Charging Host Mass storage |
Headphone jack Information whether the device is equipped with a 3.5 mm audio jack. | Yes |
Connectivity Information about some of the most widely used connectivity technologies supported by the device. | Computer sync OTA sync Tethering HotKnot |
Browser Information about some of the features and standards supported by the browser of the device. | HTML HTML5 CSS 3 |
Audio file formats/codecs List of some of the most common audio file formats and codecs supported standardly by the device. | AAC (Advanced Audio Coding) AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga) AMR-WB (Adaptive Multi-Rate Wideband, .awb) eAAC+ / aacPlus v2 / HE-AAC v2 FLAC (Free Lossless Audio Codec, .flac) MIDI MP3 (MPEG-2 Audio Layer II, .mp3) OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus) WMA (Windows Media Audio, .wma) WAV (Waveform Audio File Format, .wav, .wave) |
Video file formats/codecs List of some of the most common video file formats and codecs supported standardly by the device. | 3GPP (3rd Generation Partnership Project, .3gp) 3GPP2 (3rd Generation Partnership Project 2, .3g2) AVI (Audio Video Interleaved, .avi) DivX (.avi, .divx, .mkv) Flash Video (.flv, .f4v, .f4p, .f4a, .f4b) H.263 H.264 / MPEG-4 Part 10 / AVC video MKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks) MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v) WebM WMV (Windows Media Video, .wmv) Xvid ASF |
Capacity The capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours. | 3000 mAh (milliampere-hours) |
Type The battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer). | Li-Polymer |
Charger output power Information about the electric current (amperes) and voltage (volts) the charger outputs. The higher power output allows faster charging. | 5 V (volts) / 1.5 A (amps) 1.67 A (amps) |
Features Information about some additional features of the device's battery. | Non-removable |
Qi/PMA wireless charging |
Body SAR (EU) This SAR rating shows the highest level of exposure to electromagnetic radiation measured when the device is placed at the hip level. The top SAR value for mobile devices used in Europe is limited to 2 W/kg per 10 g of tissue. This standard follows the ICNIRP Guidelines 1998 as well as the IEC standards and is determined by the CENELEC. | 1.09 W/kg (watts per kilogram) |
Head SAR (USA) This SAR rating shows the maximum level of exposure to electromagnetic radiation taken when the device is placed next to the ear. The applicable limit for the US is 1.6 W/kg per 1 g of tissue. In the US the FCC tests and sets the SAR limits for all mobile devices, which are controlled by the CTIA. | 0.97 W/kg (watts per kilogram) |
Body SAR (USA) The SAR body rating shows the maximum level of exposure to electromagnetic radiation when the device is positioned against the body at the hip. The highest SAR value of mobile devices allowed in the US is set to 1.6 W/kg per 1 g of tissue. It is specified by the FCC and the CTIA follows whether the mobile devices comply with this standard. | 1.22 W/kg (watts per kilogram) |
Additional features Information about other features of the device. | SM-G930F - SAR (Specific Absorption Rate) EU: head - 0.406 W/kg; body - 1.480 W/kg SM-G930F - SAR (Specific Absorption Rate) US: head - 1.400 W/kg; body - 1.590 W/kg SM-G930FD - SAR (Specific Absorption Rate) EU: head - 0.406 W/kg; body - 0.621 W/kg SM-G930T - SAR (Specific Absorption Rate) US: head - 1.240 W/kg; body - 1.590 W/kg |